I carried out a rear disc and pad change on a customers Mokka and recorded it so you guys could do it yourselves.... all tho you should know you are doing that at your own risk and are responsible for any damage cause to yourselves or the vehicle

1. jack it up and remove the wheel
2. slacken and remove the 10mm bolts holding the caliper on. i used a 10mm socket and spanner to do this. make sure you secure the caliper not to damage the brake pipes or hoses
3. pull the pads out the way i couldn't on this cause they where stuck in.... move on to step 4
4. remove the carrier bolts and remove the carrier .... its held on bat 2x 14mm bolts
5. remove disc use a T30 to remove the retaining screw
6. clean everything up and wind the piston back in
7. reassemble

make sure you pump the pedal before pulling up the hand brake and always use axle stands.... play safe everyone

Hochgeladen am 23.08.2018   Problem melden   Dieses Video bei YouTube   Ells Auto Care bei Youtube