Shop TRQ on 1AAuto.com
Control Arm with Ball Joint Set https://trq.video/ia-1ASFK07443
Control Arm with Ball Joint https://trq.video/ia-1ASLF01105
Control Arm with Ball Joint https://trq.video/ia-1ASLF01106
Shop TRQ on Amazon
Control Arm with Ball Joint Set https://www.amazon.com/dp/B09HWS7PMQ
Control Arm with Ball Joint https://www.amazon.com/dp/B0D8R8SKFZ
Control Arm with Ball Joint https://www.amazon.com/dp/B0CFXDHHDN

This video shows you how to install a lower control arm with ball joint on your 2011-2019 Ford Fiesta. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

This repair was done on a 2012 Ford Fiesta S 1.6L Sedan 4-Door FWD Manual and the process should be similar on the following vehicles:
2011 Ford Fiesta
2012 Ford Fiesta
2013 Ford Fiesta
2014 Ford Fiesta
2015 Ford Fiesta
2016 Ford Fiesta
2017 Ford Fiesta
2018 Ford Fiesta
2019 Ford Fiesta

Tools you will need:
• Pry Bar https://trq.video/onz-1AXAA00020
• 15mm Wrench
• 13mm Socket
• 15mm Socket
• Dead Blow Hammer
• Pliers
• 1/2 Inch Impact Gun
• Ratchet
• Torque Wrench https://trq.video/oBB-1AXAA00044
• Hammer
• Jack Stands

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

Check out our playlist:
Ford Fiesta 2011-2019 6th Generation: https://www.youtube.com/playlist?list=PLJVpHWuCEUX_STs3PciY7p1xPvvwIM5XU

📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Hochgeladen am 27.04.2022   Problem melden   Dieses Video bei YouTube   TRQ bei Youtube