Remove/install inside rearview mirror on SLK (R171)

1 Screw 3 Electrical connector A67 Inside rearview mirror unit
2 Paneling 4 Electrical line N70 Overhead control panel control
unit

Shown on removed carrier plate
4 Electrical line 7 Groove A67 Inside rearview mirror unit
5 Mirror base 8 Retaining springs
6 Carrier plate

Remove
1 Fold down right sun visor, pivot to side and
unscrew screw (1)
2 Pull down paneling (2) until electrical
connector (3) is accessible
3 Disconnect electrical connector (3) from
overhead control panel control unit (N70)
4 Slide inside rearview mirror (A67) toward front
and simultaneously pull downward until inside
rearview mirror (A67) is unclipped from carrier
plate (6)
Install
5 Position inside rearview mirror (A67) with Ensure that electrical line (4) is not
mirror base (5) on carrier plate (6).Move pinched and damaged
groove (7) on stay (arrow) to stop and arrest
mirror base (5) on side of carrier plate (6) with
corresponding retaining spring (8). Then
arrest opposite side of mirror base (5) on
carrier plate (6)
Retaining springs (8) should catch audibly
in carrier plate (6)
6 Pull down paneling (2) and connect electrical
connector (3) to overhead control panel
control module (N70)
7 Position right sun visor on paneling (2) and
tighten screw (1)
8 Hook right sun visor into sun visor
counterbearing and fold up.

Hochgeladen am 14.03.2018   Problem melden   Dieses Video bei YouTube   MBOwnersClub bei Youtube