Follow along in this Mazda MX-5 NC restoration video as we tackle the transmission removal process in part 2 of the series. Learn step-by-step how to successfully remove the transmission from your Mazda MX-5 NC for restoration or repairs.

Part1:
https://youtu.be/BR8Imi4YN1M

Part 3:
https://youtu.be/bRPob3Gu8Zg

***********
Timecodes
***********
0:00 - Intro & Tools Needed
1:01 - Remove X-Brace
1:21 - Remove Transmission Oil
2:07 - Remove exhaust
3:33. - Remove the Shifter Panels
5:23 - Remove the Shifter
8:03 - Remove Driveshaft
10:10 - Support the diff.
10:24 - Remove PPF – (Power Plant Frame)
10:48 - Remove Clutch Slave Cylinder
11:55 - Remove transmission.
13:52 - Lower the transmission.

***********
Check List:
***********
1. Jack Up the car in the air on jack stand with good clearness about 22” recommend.
2. Remove the X brace
3. Remove exhaust
4. Remove the parking brake boot
5. Remove the swifter nob
6. Remove the windshield connects.v
7. Remove the swifter
8. Remove the 4 bolts that hold the driveshaft to diff
9. Mark on the flange the driveshaft
10. Remove the driveshaft make sure to have bucket as oil will spill out
11. Support the transmission
12 Add 2x4 wood behind the diff so the diff doesn’t sag
13. Remove 4x24mm from read brace (PPF – Power Plant Frame).
12. Remove clutch slave cylinder
13. Remove 4 blots that goes to transmission
14. Remove Underside plan to access the front bolts
Use 6’ extension to remove the front bolts
15. Remove all the bolts 14mn for Transmission
16. Tops bolts are going require long extension
17. Unplug transmission connects
18. Remove the transmission

Hochgeladen am 09.02.2025   Problem melden   Dieses Video bei YouTube   Winding Canyon Garage bei Youtube