In this video, I (roughly) demonstrate how to replace the motor mounts on your Audi A6 C7 without dropping the subframe. This method requires removing the oil cooler. It may be more time-consuming, but proves a useful approach in the right circumstances.

I recommend removing both motor mounts before installing new ones and install the driver side first.
You do NOT need to drain the oil for this method- despite what many forums say!

Please attempt this job at your own risk, I am not responsible for any injuries/damage.

Tools that helped this job:
https://www.harborfreight.com/locking-flex-head-ratchet-and-bit-set-35-piece-58074.html
https://www.harborfreight.com/wobble-socket-extension-set-9-piece-67971.html

This guide should assist Audi A6 A7 A8 S4 S5 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 with the 3.0 TFSI engine.

Timestamps:
0:00 - Intro
0:59 - Jacking Up Car
1:51 - Fender Liner
2:41 - Passenger Engine Mount
5:03 - Driver Fender Liner
5:30 - Oil Cooler
8:15 - Driver Engine Mount
9:45 - New & Old Mounts Inspect
10:16 - Installing Driver Mount
11:25 - Installing Oil Cooler Tips
12:23 - Tightening Engine Mount Bolts
13:19 - Installing Fender Liner Tips
14:15 - End Result

#audi #diy #repair #tuning #audia6 #audis4

Hochgeladen am 15.05.2024   Problem melden   Dieses Video bei YouTube   Super Average Cars bei Youtube