Couldn't find much info on this so decided to make a video (sorry for the bad angles and filming just was in a rush to get it done).

I also forgot to add in the video that while you have it out, jump the thick black wire with the yellow/red wire to make sure the motor is running well. Testing amp draw while motor is running is always a good idea it was just too tight and I was short on time to do it in this case. I usually make sure motor amps are below 20 ideally. Crossing into 30 amp range will cause these style resistors to blow quite frequently.

Hochgeladen am 26.05.2020   Problem melden   Dieses Video bei YouTube   Charlie_Sushi bei Youtube