Reparaturanleitungen Nissan X-Trail II (T31) Innenraumgebläse
Reparaturanleitung Nissan X-Trail II (T31) Innenraumgebläse -
Nissan xtrail T31 pollen filter and blower motor change


I used to own a few Nissan Z31 so sorry for the incorrect words at the beginning. It is definitely for a Nissan T31 Xtrail
Pollen filter. 1. remove side kick panel, 2. Look and reach right up the back to find 20cm x 2cm plastic clip, 3. unclip from the bottom, 4. get screwdriver and leaver out white filter, 5. put new filter in (might be a tight fit), 6 replace cover top them bottom.
If you have big hands it is tight so there is a few sharp plastics up behind there. (bit of blood due to my 6ft 9 frame and big hands)
To clean blower motor (Or change it). 1. remove glovebox via 6 screws inside and two under box, 2. pull glovebox towards the seat and upwards (left hand side of glovebox have angle slides that fit into the dash), 3. reach around the back behind dash, 4. locate small screw on the side of the blower and remove screw with socket, 5. reach behind and turn the blower assembly 2 cm counter clockwise and pull motor out, 6. pull blower motor out until the cables run out of space and flip over and clean all the little mouse / rat bedding out, (If changing the motor pull the connector off before removal as it is tight), 7. place motor back, connect cable if needed, turn 2 cm clockwise (Connector sites to the top), align screw holes, put screw back in, refit glovebox taking care to locate the two slides on the left (don't hit to fit, slide and readjust if not going in) and place box into place, put in screws and the box lock clip up top.
Hochgeladen am 09.02.2021 Problem melden Dieses Video bei YouTube VideoToGo Darwin bei Youtube