Buy Now!
New Control Arm with Ball Joint Set from 1AAuto.com https://trq.video/ia-1ASFK10579
New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ib-1ASLF01244
New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ia-1ASLF01245

This video shows you how to install new front lower control arms with ball joint from TRQ on your 2012-2019 Fiat 500. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

This repair was done on a 2015 Fiat 500 c Pop 1.4L Convertible 2-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Fiat 500
2013 Fiat 500
2014 Fiat 500
2015 Fiat 500
2016 Fiat 500
2017 Fiat 500
2018 Fiat 500
2019 Fiat 500

Tools you will need:
• Phillips Head Screwdriver
• Pry Bar https://trq.video/oaBy-1AXAA00020
• 17mm Wrench
• 18mm Wrench
• 9mm Wrench
• 14mm Socket
• 15mm Socket
• 17mm Socket
• 18mm Socket
• E18 Inverted Torx Socket
• T30 Bit
• Socket Extensions
• Torque Wrench https://trq.video/oca8-1AXAA00044
• Anti-Seize Grease
• Brake Parts Cleaner
• Gloves https://trq.video/ocSZ-1AXSS00048
• Safety Glasses
• Bore Brush
• Chisel
• Floor Jack
• Hammer
• Jack Stands
• Pick https://trq.video/oaqB-1AXAA00037
• Punch
• Rubber Mallet

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

Check out our playlist:
Fiat 500 1st Generation 2012-2019: https://www.youtube.com/playlist?list=PLJVpHWuCEUX8a67kXctrTmDHQRhkkIop6

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Hochgeladen am 07.10.2025   Problem melden   Dieses Video bei YouTube   TRQ bei Youtube