In this video I show how to replace the front headlight bulbs on a Peugeot 3008 2018.
Access to the bulbs on this model can be tight, but I cover the correct method, bulb location, which covers to remove, and how to fit the new bulbs without damaging clips or seals.

This guide applies to Peugeot 3008 models from 2017–2020, including halogen headlight units.

WHAT’S COVERED:
Headlight housing access, removing the rear cap, unlocking the bulb retainer, replacing the H7 or sidelight bulb, correct bulb orientation, refitting the dust cover, and checking the lights after installation.

TOOLS & PARTS USED :
Replacement headlight deeped bulbs (H7) - https://amzn.to/4pEy9VO
Replacemetn headlight highbeam (HB3U) - https://amzn.to/48F1jhz
Gloves - https://amzn.to/48FIMS8
Torch - https://amzn.to/48RQF5X
Trim-friendly tools - https://amzn.to/3MHvCvi

HEALTH & SAFETY:
Always switch off the ignition and let components cool before working near the headlights.
Avoid touching the glass of new halogen bulbs.
Ensure the bulb is fully locked in place to prevent poor beam pattern or loose fittings.
Any repair work or maintenance is carried out at your own risk.

AFFILIATE & RESPONSIBILITY DISCLAIMER:
Some links in this description may be Amazon affiliate links, meaning I may earn a small commission at no extra cost to you.
Any maintenance or repairs you carry out are your own responsibility. I cannot be held liable for injury or damage to your vehicle.

🔖 Hashtags

#peugeot3008 #headlightbulb #bulbreplacement #carmaintenance #mechanic #diycarrepair #automotive

In this video I show how to remove and replace the front headlight bulbs on a Peugeot 3008 2018 (Mk2).
Whether your dipped beam, main beam, or sidelight bulb has failed, this guide shows how to access the headlight unit, remove the bulb holder, and install a new bulb safely and correctly.

This applies to Peugeot 3008 models from 2017–2020, including halogen headlight versions.

WHAT’S INCLUDED:

Accessing the headlight unit

Removing the rear cover

Releasing the bulb holder

Removing the old bulb

Installing a new bulb (H7 for dipped beam on most models)

Refitting the cover and testing the lights


TOOLS & PARTS USED :

New H7 or Hb3u bulbs (depending on your headlight type) - https://amzn.to/48TGYVA

Gloves (do not touch bulb glass) - https://amzn.to/3MdiRsn

Trim tools if needed for access - https://amzn.to/48nElve

Torch or work light - https://amzn.to/3KqCyfH

HEALTH & SAFETY TIPS WHEN WORKING ON CARS:

Ensure lights are turned off before starting

Allow bulbs to cool down fully

Wear gloves and eye protection

Avoid touching the glass part of halogen bulbs

Work in a well-lit and stable area

Test all lights after installation

AFFILIATE & RESPONSIBILITY DISCLAIMER:
Some links in this description may be Amazon affiliate links, meaning I may earn a small commission at no extra cost to you.
Any work you carry out on your vehicle is at your own risk.
I accept no responsibility for injury, damage, or incorrect repairs.
Always follow Peugeot’s official procedures for your specific headlight type.

🔖 Hashtags

#peugeot3008 #peugeot #3008 #headlightbulb #bulbreplacement #carrepair #diycars #maintenance #mechanic

In this video I will be looking at how to replace the front headlight bulbs on this Peugeot 3008 2018 The bulbs that can be replaced are a H7 and HB3.
#cars #mechanic #sealey #maintenance #doityourself #vehiclemaintenance #oilchange #oil #bosch #blueprint #castrol #motaquip #oillevel #peugeot3008 #bulbs #headlightbulbs #h7 #hb3bulb

Hochgeladen am 07.03.2024   Problem melden   Dieses Video bei YouTube   DaringBeefcake bei Youtube