Reparaturanleitungen VW Tiguan I (5N) Kurbelwellensensor



Reparaturanleitung VW Tiguan I (5N) Kurbelwellensensor -
How to Replace Crankshaft Position Sensor 2009-2017 Volkswagen Tiguan

consent placeholder
Auf TV abspielen noch nicht möglich

Buy Now!
New Crankshaft Position Sensor from 1AAuto.com https://trq.video/ib-1AECS00086

This video shows you how to install a new crankshaft position sensor on your 2009-2017 Volkswagen Tiguan. The crankshaft position sensor is an important component of any electronically controlled ignition system. The sensor provides the computer with data about the position of the crank shaft to properly adjust ignition timing. If the sensor in your vehicle is broken or malfunctioning, you may suffer poor performance, or get a check engine light.

Estimated installation time for a professional technician is approximately: 1 hour 54 minutes

This repair was done on a 2017 Volkswagen Tiguan Wolfsburg Edition 2.0L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2009 Volkswagen Tiguan
2010 Volkswagen Tiguan
2011 Volkswagen Tiguan
2012 Volkswagen Tiguan
2013 Volkswagen Tiguan
2014 Volkswagen Tiguan
2015 Volkswagen Tiguan
2016 Volkswagen Tiguan
2017 Volkswagen Tiguan

Tools you will need:
• Flat Blade Screwdriver
• 7mm Socket
• Trim Tool Set https://trq.video/oaTk-1AXXX00006
• T25 Torx Socket
• T30 Socket
• Ratchet
• Socket Extensions
• Torque Wrench https://trq.video/obLM-1AXAA00044
• Gloves https://trq.video/ob9k-1AXSS00048
• Safety Glasses
• Floor Jack
• Jack Stands
• Pick https://trq.video/oahn-1AXAA00037
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Hochgeladen am 05.03.2025   Problem melden   Dieses Video bei YouTube   TRQ bei Youtube